New High Security Container Seal Standards—March 1, 2012
Published February 15, 2012 | 
The message advised C-TPAT partners that the new International Organization for Standardization (ISO) mechanical seal standard (ISO 17712:2010 ) is scheduled to become effective on March 1, 2012, and recommended that certified companies begin phasing in ISO 17712:2010 compliant seals after their current stocks of high security seals have been exhausted.
Since the issuance of the previous notice, C-TPAT has learned that the tamper evidence element of the ISO 17712:2010 requirements (Clause 6) cannot be met. To date, no accredited independent laboratories have been willing to test and certify seals as complying with the tamper evidence requirement. Consequently, C-TPAT has determined that implementation of the new standard is not viable by the March 01, 2012 deadline.
C-TPAT has also become aware that the ISO is working to amend ISO 17712:2010 to address the issue with this standard. Therefore, implementation of the new ISO 17712:2010 standard for mechanical seals will be delayed until C-TPAT receives definitive information that ISO has resolved this issue. C-TPAT partners will be advised when the ISO has resolved the tamper evidence issue with the ISO 17712:2010 standard.
Since the ISO 17712: 2010 (18 mm) certification for high security seals is attainable without the Clause 6 testing portion of the standard, C-TPAT encourages partners to buy seals that meet this part of the standard. If C-TPAT companies decide to transition to seals that meet this portion of the new ISO standard, they should request documentation to confirm that the purchased seals comply with the current testing requirements for ISO 17712: 2010 (18 mm) certification.
Shipping Aircraft Parts
Published December 8, 2011 | When shipping aircraft parts by air—and even by ocean, the concerns are: weight, volume and whether you are shipping hazardous items. However, to get those parts from the manufacturer or repair facility to the destination, port or airport requires more information, and failure to supply it can cost you dearly.
Items shipped via ground transportation require a National Motor Freight Traffic Association Inc. classification, which is based on precisely what you’re shipping. For instance, below the engine pictured above is a circuit breaker. If you classify this as “aircraft parts”, class 150 it will cost nearly twice what you would pay to move it as a circuit breaker—class 77.5. A tire on the engine stand, below right, would be class 70.
“By consulting with our staff in advance Packair can assist in the proper method to achieve the best bottom line pricing”
“Just a note you cannot dual rate one carton, might be a little miss leading……”, thought to offer that point…
Information is the key to better pricing. Give us enough information and our rates will be as good as our service! Give us a call, we’re here to help!
ATA Carnet Preparation Service
Published November 29, 2011 | Packair One-day ATA Carnet Processing Service
What is an ATA Carnet?
In a nutshell, a carnet is a passport for cargo temporarily leaving and entering a country.
If your company is participating in a tradeshow in another country, you want to take your booth, product samples, etc. , all those items that you will both take with you and bring back may be listed on an ATA Carnet, (cargo passport), thus making it possible to bring them in and out of the country you are visiting without paying duties and taxes, as long as that country is participating in the program. If the product you are demonstrating is a printer, extra ink and paper would not qualify, they are expendable. Or if you’ve been contracted to install a sophisticated communications system in Morocco, you will have tools and possibly specialized vehicles you need to take to the job site, and the job could take 9 months to complete what are your options?
You have up to a year to export and return these items from the country you’re visiting. Packair provides urgent ATA Carnet processing service to get it prepared and registered within a day!
Packair provides ATA Carnet service for our clients in the film industry—camera and grip equipment, wardrobe, etc., for animal actors, for companies sending equipment to trade shows, and much more. Don’t hesitate to contact Packair to find out if your shipment qualifies and if the country you’ll be visiting is a Carnet participating country. Our experts are at your service.
Packair-It!
==>Get PackAir Quote Online <==
==> Contact Packair <==
Export News 11-16-2011
Published November 16, 2011 | | US farm exports boom as rest of economy struggles San Francisco Chronicle As US Agriculture Secretary Tom Vilsack visits Vietnam and China to talk trade this week, he’s hoping to build on one of the few bright spots in the struggling American economy: agricultural exports. US agricultural exports are projected to reach a … See all stories on this topic » |
| US Mills Export 1.2 Million Tons in September Steel Market Update (blog) The US steel industry exported 1100063 metric tons (1212610 short tons) of steel products during the month of September 2011 according to data released by the US Department of Commerce on Monday. The 1.2 million tons is the highest level of exports … See all stories on this topic » |
U.S. Economy News 11-16-2011
Published November 16, 2011 |
|
||
| Consumer Prices in US Unexpectedly Fell 0.1% in October BusinessWeek Import prices in the US, reported Nov. 10, dropped 0.6 percent from the prior month as oil and food expenses retreated. Higher materials costs that have now started to recede as well as seasonal clearance of patio furniture “hurt” gross margin in the … See all stories on this topic » |
||
|
||
|
Import News Updates 11-14-2011
Published November 16, 2011 | | Obama’s Policies Make China Stronger And The US Weaker Forbes A rise in the value of the yuan relative to the dollar is supposed to make Chinese imports more expensive, and US exports to China less expensive, thereby reducing Chinese imports and increasing US exports. The problem is this theory has failed … See all stories on this topic » |
| Import deal opens green markets Adelaide Now Earlier, it was partner Tim Mathieson’s turn to look goofy, as he gestured to his opposite number, US First Lady Michelle Obama, that he was closer to her height now that he had donned his heels. Ms Gillard said the decision to slash import tariffs … See all stories on this topic » |
| S Korea Oct Import Prices Rise At Fastest Pace In 6 Months NASDAQ SEOUL -(Dow Jones)- South Korea’s import prices rose at their fastest pace in six months in October compared with a year earlier, due to higher oil prices and weakness in the value of the won versus the US dollar, the Bank of Korea said Tuesday. … See all stories on this topic » |
| Free Trade for Panama, US NuWire Investor Looking to start an import-export business? If you plan on trading between Panama and the US, the situation is looking more favorable than ever. Considering the fact that Panama is one of the region’s highest ranked import-export markets, … See all stories on this topic » |
| Canada-China trade diversifying beyond commodities Vancouver Sun China expects to import that much again – $8 trillion US – within the next five years, he said. The growth will be in the variety of products imported as well as the volumes, he said. “There will be at least $1 trillion US in imports every year. … See all stories on this topic » |
Domestic Shipping – What You Need to Know
Published November 10, 2011 | Domestic Shipping by Packair
When you hear the term “Domestic Shipping” it pretty much means shipping within your county’s borders. For our purpose, that means the U.S.A. Depending on the point of origin and the destination, this can be accomplished by air, ocean, truck or rail. There are some things that may be helpful to you when planning such a move.
Shipping by air is almost always the fastest means of moving something but there are a number of restrictions. Air freight may be shipped on a passenger aircraft if the company has prior TSA approval to do so. Not all businesses appear on TSA’s certified list of “Known Shippers”, so they must look to the all cargo aircraft, or begin the process to be added to that list. Individuals do not qualify for the “Known Shipper” program. The options are very limited for domestic air, and prices typically range from expensive to very expensive for all-cargo.
What are your choices for Domestic Shipping?
If it absolutely has to be there overnight, air may be your only option. However, trucking companies now, with team driving, can actually make it coast to coast in 3-4 days. Typically, for less than a truck load (referred to as LTL,) the charges are based on three things: dimensions, weight and classification. Dimensions (length, width and height,) allow them to calculate how much space is required. Weight is governed by the DOT, and so a load must be carefully calculated, with LTL shipments to make sure it is properly distributed, and does not exceed the maximum allowable weight in accordance with the law, so this is carefully monitored. Finally: Classification. This is where it gets tricky. For you, not so much, give us the other two –dimensions and weight – and tell us what it is and we will find the classification. According to the National Motor Freight Transportation Association, “Freight classification is based on weight and stow-ability. . . Freight is classified based on density, unless its stow-ability is unusual.” Unusual stow-ability would be a pallet that can’t be stacked, some really odd-shaped item, etc. This is how the trucking company can figure out what they’re getting into and whether it will fit. It’s not the fastest, but it is cost effective.
Then there is rail, which can be considerably less expensive, but for obvious reasons, they’re pretty picky about what they’ll take, how much of some items they’ll allow on-board, etc. Truck/rail combinations help get your product or shipment from your door to your client’s door, whether that’s in the US, Canada or Mexico. It is generally more cost-effective than trucking – if you have the time. There can be considerably more transit time required to ship by rail, but if you have the time, it can be worth it.
Finally, let’s talk briefly about Alaska and Hawaii. Again, transit time will influence your decision greatly: you can send it by air, or by ocean, and sometimes – depending on where your cargo starts out and the final destination, it could require a combination of truck, ocean or rail to complete, but it can be done.
Shipping “hazardous materials” or “dangerous goods” is do-able, but a topic too extensive to address today, and will be a blog for another day.
If you’re looking for excellent customer service, competitive rates and comprehensive service,
please call Packair at (310) 337-9993 extension 201.
Packair will get it there!
Packair-It!
==>Get PackAir Quote Online <==
==> Contact Packair <==
Importer Security Filing Update 11-09-11
Published November 9, 2011 | Importer Security Filing and its Liability under the Bond
Importer Security Filings (ISF 10+2) is the responsibility of the Importer. Estabilish procedures to comply now in pre-penalty period. January 2010 the Importer will be assessed Customs penalties of $5,000.00 per violation. A 10+2 form must be provided to us for each and every ocean import shipment. We can provide you with a template form upon request. You can visit the U.S. Customs website for futher details at http://www.customs.gov/xp/cgov/trade/cargo_security/carriers/security_filing/ Contact us if you have any questions regarding 10+2. ***
As of today CBP has not enforced its penalties for non-compliance with ISF requirement, however it is reminded that once CBP mandates full compliance, penalties can be applied retroactively going back as far as five years of transactons.
It is required that Importer must obtain a Bond for each and every transactions covered under ISF obligation, and it is reminded that ISF Bond is a stand alone bond and a seprate Bond from an Importer’s Bond for filing entry unless Importer is covered by a Continuous Bond which is sufficient for both ISF and Entry requirement.
If you have any questions about this obligation, please be free to contact Packair management.
Export News Updates 11-08-2011
Published November 8, 2011 | US proposes new export control rules for aircraft
Reuters
WASHINGTON Nov 7 (Reuters) – The Obama administration on Monday proposed new rules to govern exports of military aircraft and associated parts, a move that a major industry group said would save US companies time and money. …
See all stories on this topic »
‘A Strong Dependence’: The Potential Downside to China’s Investments in Latin …
Knowledge@Wharton
He notes that “Mexico and Central America are damaged in their trading relationship [with China]because they export products that compete against the Chinese.” On the other hand, “South America benefits from its exports of natural resources [to China]. …
See all stories on this topic »
Econbrowser: Guest Contribution: “What can exports tell us about …
By Menzie Chinn
U.S. exports have surged since the end of the recession. Real exports are up 23% in the 9 quarters since the recession ended (a better performance following a recession than any of the last 3 recessions including the strong early 1980s …
Econbrowser
| XE.com – UPDATE 1-US Energy Department studies natgas export … The U.S. Energy Department has commissioned two studies on the potential impact of exports from the booming U.S. natural gas sector, a senior official told a Senate hearing on Tuesday. XE Forex News |
CBP MPF Rate Change to take effect on 11-05-2011
Published November 4, 2011 | MPF - Merchandise Processing Fee in going up!
November 1st, 2011, U.S. Customs and Border Protection distributed CSMS# 11-000274 to inform the trade that they “WILL BE READY TO ACCEPT THE NEW MPF (CLASS CODE 499) RATE OF 0.003464 ON SATURDAY, NOVEMBER 5, 2011 AT APPROXIMATELY 7:30 AM.” Previously the rate has been 0.0021% of imported FOB value.
Follow Us!